Chapter 114 painstaking refiner

There are two reasons for this result: 1. The aura attribute of the array and the aura attribute of the appliance itself sect. That is to say, the aura attributes of the array and the aura attributes of the appliance are either opposite, or the attributes of the two cannot effectively promote each other and eventually form a fusion. To solve this step, you must have a sufficient understanding of the aura attributes of the two. Or the attributes of the two are the same; or the attributes of the two can grow together, so that the appliance can maximize its performance.

2, that is, in the process of fusion of arrays and instruments, due to the lack of closure, some other auras are mixed in the middle, which eventually leads to the failure of fusion.

After understanding the reason for the failure, Ma Yu took a deep breath. After months of hard work, Ma Yu finally made a breakthrough. Ma Yu was very happy. Ma Yu adjusted her state and thought about the whole refining process carefully from beginning to end many times.

After careful consideration, Ma Yu decided to solve the problem of attribute commensation one by one. This problem seems simple but it is actually quite complicated. You should have a clear understanding of every aspect such as material selection, refining and heat. Otherwise, it will be difficult to succeed. Take the nature of the selected material as an example. The appliances above the magic weapon have high requirements for the performance and properties of the material itself.

All the appliances above have a problem of device capacity, and the size of the device capacity directly determines the level of the appliance itself. Of course, to play the maximum role of the appliance itself, the capacity alone is not enough. The repairer, the appliance and the external aura must be coordinated to play the greatest role. If a person does not achieve the corresponding strength, the phenomenon of counterattack will occur if he uses weapons far above his own strength. Just like Ma Yu, although she has a "God-eating sword", she can't use it easily at all. That's the reason. Although some people are strong, they can't play the best effect because they don't have a weapon that is commensurate with them. If they want to use all their strength on ordinary weapons, they will definitely only destroy this weapon. Only when the three match each other can the greatest effect be achieved.

Because he wants to refine weapons above the magic weapon, Ma Yu is also much more cautious in selecting materials than before. The materials in Mr. Qin's storage ring are quite rich. Ma Yu chose several materials from them, such as black gold iron essence, black jade lead, Chiyang copper, wood spirit tin, etc. These materials are undoubtedly hard to find outside. But for Ma Yu, it's a touch of the hand.

After the materials were selected, Ma Yu began to carefully consider the properties and properties of these materials. Among these materials, Chiyang copper is naturally the main material, and the others are auxiliary materials to better improve the various properties of the main materials. This Chiyang copper is naturally a metallic material, but this kind of Chiyang copper can communicate and transmit various properties of aura, which is a good main material for the refinery.

Although Chiyang copper itself has various good properties, it still has shortcomings in its own hardness, toughness, fusion and other aspects, and Wujin iron essence, black jade lead, Muling tin and other materials have made up for these defects of Chiyang copper in this regard, so as to maximize the various properties of Chiyang copper in all aspects, so that it can It is enough to achieve the best performance of refined weapons.

After the materials are ready, they will begin to refine various materials according to the method of Liuqi refinery. Six Qichengqi method: six steps such as modeling, blending materials, calcination and purification, casting and forging, quenching and lifting, and temperature cultivation. Now Ma Yu is quite proficient in this "Six Qi Chengqi Method". Ma Yu kept waving her hands, and the model of a small and exquisite sword made of deep-sea mud mixed crucibles and other materials was formed in Ma Yu's constant wavering hands.

Ma Yu can also carve some exquisite patterns inside this exquisite sword model, which looks very exquisite. After the first step was completed, Ma Yu began to adjust various materials again. The key to this adjustment material is the ratio of various ingredients. If the ratio between various materials is not well mastered, even the best materials will be difficult to achieve the best performance. Fortunately, in this "Six Qichengqi Method", in addition to the methods and steps of refining, there are also some different types of utensils with the ratio of various material components. So Ma Yu doesn't have to be too distracted to study herself on this point. According to the "Liuqi Chengqi Method" about the ratio of various materials for the refining of Chiyang copper, Ma Yu prepared more than 10 copies at once so that it can be used continuously after failure.

The next key step is to calcination and purification. This step is related to the performance of the weapon, an important step, and also an important step related to the ability to integrate with the subsequent array. Ma Yu opened the Sanyang refinery furnace, and a Yuanyang real fire hit the furnace. Suddenly, the fire in the Sanyang refinery furnace rose, and a hot temperature filled Ma Yu's house. In fact, for general craftsmen, they use some ordinary fire or lava fire, but rarely use monks like Ma Yu to emit Yuanyang real fire. This Yuanyang real fire is formed by monks with fire attributes using the spiritual power of their own fire attributes. After special transformation, Ma Yu has a five-e elements spiritual body, this Yuan Naturally, Yang Zhenhuo is much more powerful than the Yuanyang Zhenhuo issued by ordinary monks with fire attributes. Therefore, this Yuanyang real fire is also a significant difference between refinery monks and ordinary monks.

Although monks with other spiritual attributes can also convert their spiritual power into Yuanyang real fire, if you want to refine instruments, it must be Yuanyang real fire emitted by fire attribute spiritual body, which has the best effect! This is also the reason why refiners need fire-attribute spiritual bodies, but the spirit bodies with fire-attribute are too fierce, so they must also have a spirit body with wood attributes at the same time, so that fire and wood can achieve a perfect effect. Ma Yu's natural Yuanyang real fire with the body of five elements is also colorful. However, due to Ma Yu's own cultivation restrictions, at present, the colorful color of Yuanyang real fire is not obvious.

The purification process of this material is also relatively the most time-consuming, and it is also quite careful and cumbersome, because all materials must be purified and finally be integrated into the main material to become a clinker according to the "six-joint ratio method", and then carry out several subsequent processes. In this process, we should have a good grasp of the purity of purification materials. At this point, it can also reflect whether the basic skills of refining are solid or not. Only people with rich refining experience can extract materials with higher precision.

In addition to the accumulation of experience, the most important thing in this process is to rely on the color discrimination method of flame. Because in the form of cast gold, gold and tin, black turbidity, yellow and white; black turbidity is produced by the combustion of charcoal, branches and other hydrocarbons attached to the raw materials. Yellow and white gas is mainly produced by the melting of tin with a low melting point. At the same time, the oxides, sulfides and other elements contained in the raw material also evaporate to form different colors of smoke; yellow and white gas is exhausted, followed by blue and white; when the temperature rises, the blue flame color melted copper is mixed in, so there is blue and white gas; the blue and white gas is exhausted, and the green gas is secondary. No matter how high the temperature is, the copper is fully melted, the amount of copper is greater than the measure of tin, and there is only green gas once it enters. Moreover, the flame color is pure, indicating that too many impurities in the raw materials have been gasified and run away, and the remaining residue can be removed; then it can be cast. It is mature and can be cast.

The above order is also a summary of the long-term practice experience of ancient craftsmen. Later, people used "purity" to describe kung fu, which originated from here.

So the color of the flame presented by different materials during the calcination process is also different. Under the manipulation of Ma Yu, all kinds of materials have been gradually refined. At this time, Ma Yu's spiritual power consumption is also very serious. A top-grade spiritual stone flashed and was grasped by Ma Yu from the storage ring. A trace of pure aura in his hand was continuously absorbed by Ma Yu. "Wow," Ma Yu took a long breath. It seems that this refiner really consumes real yuan! Ma Yu also sighed secretly in her heart. At this time, Ma Yu felt the difficulty of the refiner. No wonder the refiner industry has always been an enviable industry. The consumption of this real aura alone is not affordable for ordinary people.

Ma Yu actually doesn't know that for various refiners, there are not many people who rely solely on their own Yuanyang real fire to refine their weapons. Most of them use some geocentric lava or other animal fires or some spiritual fires to refine them. This does not mean that the effectiveness of its own Yuanyang real fire is poor. On the contrary, Yuanyang real fire that can completely manipulate itself is far better than ordinary flames. Because its own Yuanyang Zhenhuo is produced by the sublimation of its own aura Zhenyuan, which can perfectly fit its own body and is more convenient for accurate operation in the process of use.

This is much higher than those who use other flames to refine, but this is not absolute, because some people can use some other flames to perfectly fit their own attributes, and they also show quite strong strength in the refinery. It's just that this kind of Yuanyang real fire consumes too much for refining. Anyone who can refine completely with his own Yuanyang real fire either has a large number of spiritual stones, or this person's own strength is very strong.

All the preparations are ready. The following is the process of Ma Yu's condensation array and the fusion of the instrument. According to the characteristics of the metal properties of the instrument to be refined and some fire attributes, the true element in Ma Yu's body condenses a simple metal and woody array. With the continuous operation of Zhenyuan in Ma Yu's body, the aura of the same attributes around Ma Yu's body continues to converge along the trajectory of Ma Yu's hands. As the aura became stronger and stronger, a gathering array completely condensed by aura appeared in front of Ma Yu out of thin air.

Ma Yu did not dare to neglect the array, and hurriedly controlled the array and slowly melted to the blank shape of the sword that had been calcinning. One meter and a half, 20 centimeters, 10 centimeters of "poof" with a sound, the array finally came into contact with the sword body. Under the observation of the five elements's eye, Ma Yu, with strong soul perception, controlled the array gradually to the red and semi-flowing shape of the sword body, slowly melted and gathered spirits. In the process of fusion of the array and the red sword body, the red sword body is constantly vibrating, and it is obvious that the performance of the sword body is constantly improving.

Seeing that the array had been merged with the sword body, Ma Yu's nervous mood eased slightly. After all, it has begun to integrate, which means that there is a possibility of success. After a boost, Ma Yu continued to manipulate the gradual integration of the two. Just as Ma Yu was extremely excited, suddenly a bursting sound came from the place where the two came into contact, and a strong air wave suddenly rushed Ma Yu a few meters away. Hit the wall with a touch.

Ma Yu was very embarrassed at this time. Her clothes had been smashed by the explosion energy. Due to the explosion, some residual magazine ashes sprayed Ma Yu. Ma Yu slowly stood up from the ground and couldn't help smiling bitterly. It seems that it is really not easy to practice!

Ma Yu cleaned up the messy scene. Then she continued to start new attempts. Ma Yu is not a person who gives up easily. No matter how difficult it is to recognize things, there must be a result. After several similar failures in a row, Ma Yu finally found the problem.

Under the observation of Ma Yu's five elements, Ma Yu found that due to the closure in the process of fusion, it led to the mixing of other attributes of aura in the fusion process, which finally led to the failure of fusion. It seems that we must find ways to ensure absolute closure in the process of integration. But how can we achieve that absolute closure? Ma Yu fell into meditation.