Chapter 194 Making up for mistakes

Needless to say, the workers quickly gathered. A total of four workers, wearing brand-new uniforms and labor insurance clothes, wearing helmets and tools, were all ready.

Su Xing smiled and said with a yin and yang in the back, "Oh, the performance team is done."

Su Cheng looked at him casually, but saw that Su Xing's face was full of fake smiles, as if to hide his nervousness. Su Cheng didn't care. It was normal for him to be nervous. The paper performance of COSCO Shipping was far ahead, and the on-site results were very important to both sides.

Four workers operated new machines such as pipe coiling machines and flame cutting machines in turn. Xiao Yu introduced them to Minister Yue on the side. Except for these two people, the whole inspection team has been making records from beginning to end. On-site evaluation is for the record. Many mergers of state-owned enterprises will have disputes. In the 1980s, there were more officials petitioners than the public. Once something happens, these records become an important basis.

He Chengjun was very nervous until the last one to operate the carbon arc gouging. The on-site inspection shows the factory's mastery of new equipment and new processes. It will form a series of percentage figures, which will finally be multiplied by paper results.

If the on-site inspection gets 60%, the paper score of the new equipment will be multiplied by 60%. In other words, the on-site inspection explains the factory's software, and the paper audit shows the factory's hardware.

Any loose item will cause the total score to be too low. The result is the loss of the status of the merged subject. He Chengjun, Su Cheng and others are working hard to improve their hardware performance, and the foreign engineers invited can improve their software performance to a certain extent. However, the on-site inspection must be reflected by the on-site workers. Although you are prepared in advance, it is like an exam. It is impossible to predict how much you can play in advance.

Carbon arc gouging is part of the welding process, which can be used to plan grooves and eliminate weld defects. It is a commonly used technology for the processing of ships and petrochemical equipment. However, it is also a high-tech job. Generally speaking, the level of workers who can do carbon arc gouging is not bad. Especially in 1989. It is definitely one of the high-end technologies.

Su Cheng also knew this, so he was a little relieved and thought: at the end of the performance, it was to watch the pure machine. The machine is there, and it won't suddenly break down...

He thought so and inadvertently looked to the right side, but saw that Su Xing's face was full of seriousness, almost holding his breath.

Now, Su Cheng also focused on it.

Out of spirit, he took a few steps forward and stood in the second row of the crowd. You can clearly see the console from here.

A COSCO shipping staff came over and gave everyone a pair of glasses. Su Cheng put it on and took it off. It was too dark. Can't see clearly.

The staff had to come over again and said, "Su Dong, you have to put on your glasses and weld your eyes."

"I know, I want to see more clearly."

"See clearly? Oh. Why don't you look from the side? The other party knew Su Cheng and pointed to him the position on the left. There were some workers waiting there, all of whom were familiar faces.

Su Cheng immediately walked over. At about the same time, the welder also stuck the workpiece waist-length and was ready to do it.

At this time. Sucheng can just see the rough particles on the edge of the slope. He thought the welder wanted to polish it, but the other party had already caught the carbon arc abore plane gun.

Su Cheng's pupils immediately shrank.

The contact surface of the carbon arc gouger must be cleaned and smooth. Its requirements in this regard are much higher than ordinary electric welding. Because when working, the carbon arc gouging gun will blow up the iron water, like an iron bean, keep moving forward, filling defects and completing welding.

In this process, the operator's speed is too slow and the surface is too rough, which can easily cause sticky residue or planing, that is, the liquid iron bean is not blown to the correct position. In the workshop environment, the iron bean will quickly cool down and turn into a solid iron slag with high hardness.

Once this happens, the welding is considered a failure, and it is very obvious. At present, Xiaoyu, who seems to be professional, can see that it is an ordinary person who can run up and shake the welding parts to find the problem.

Su Cheng turned his head and looked at Su Xing, and saw a quiet smile, as if Zhizhu was holding it.

Before he could think about it, Su Cheng shouted in front of the electric welder, "Master Du is so honest that he took a new board directly. How long will it be wiped?"

He turned his head and shouted, "Come here for a few more people. Don't waste time. Let Master Du deal with the steel noodles alone. I don't want everyone to have dinner!"

Su Cheng didn't give everyone a chance to ask questions. He took a few steel wire brushes from the side, put them on the steel plate, and wiped them desperately. While wiping, he said, "When the surface of the material is cleaned, it is usually treated by chemical method first, and then the physical plot method is used when welding. If the quantity is small, the welder will do it by himself. If the quantity is large, the machine can also be used. Although it's a drill today, it's really a waste of time to be alone, and it has nothing to do with the new machine..."

When several workers in front of him heard Su Cheng's shouts, they took off their gray glasses and saw the meticulousness of the surface of the workpiece. I have been working in the factory for a long time, and they are basically all versatile. It is not surprising that the level of a Grade 5 carpenter has a level of a Grade 4 milling carpenter. It is also normal for a Grade 4 electrician to burn spot welding. At this moment, when they saw the rough condition of the workpiece, they were shocked and rushed up to help clean it with a steel wire brush.

At this point, Su Cheng was relieved. He looked up and looked deeply at Master Du, who burned electric welding. The two had met before and discussed the use of electric welding on board. At this moment, Master Du did not have the excitement and vividness of the day at all. He stood on the side foolishly and didn't know how to take a wire brush to help. He was completely in a strange performance.

The people of the inspection team were on the side. Su Cheng couldn't say anything. He raised his buttocks and wiped them desperately.

Su Xing looked at Su Cheng in surprise, as if he didn't know him. Indeed, although Su Cheng in front of him was wearing a suit shirt, his legs were on the shelf and the corners of his clothes were rubbed against the workpiece. Looking at his movements, he was harder than the workers next to him.

Three or four people wiped the workpiece less than 1 meter wide with a steel wire ball. It was smooth and clean in minutes.

Su Cheng's last one straightened up, looked at the electric welding master, and said, "The surface is clean, Master Du, do you need to give a hand?"

"No, I can do it alone." Master Du wore a mask on his head and couldn't see his expression clearly.

Su Cheng retreated to its original position step by step.

Master Du tightened the mask. The body leaned forward slightly, gently touched the surface of the workpiece, and heard a "thorn". A brilliant welding flower flew up, almost a few meters long. The dazzling arc is like fireworks in the middle of the night, a rainbow after the rain. The fresh scenery is shown in a strong contrast... The scorching iron water is like a small glass bead, falling from the workpiece and bouncing on the ground.

The dense Mars spewed out of the flame mouth reserved under the workpiece shelf. The longest one is 10 meters away and magnificent, as if it were splashing when the rocket was launched.

If it is divided by the beauty of the scene, welding should definitely be ranked in the top three. With the extension of working hours, the flame mouth of the spark is covered with a layer of white smoke, which is like a barrel that keeps firing. The surrounding air was filled with the smell of metal, and the thick fog quickly surrounded Master Du, making half of the workshop like an unfinished battlefield...

In a flash, the electric spark gradually disappeared, and a beautiful straight weld appeared directly above the workpiece. The welded metal parts stand firmly on it.

"It's so beautiful!" Even Minister Yue couldn't help admiring.

"The air cleaning device is installed on the roof of our workshop, which will become a standard configuration in the future. This is the advanced experience we have gained from abroad. He Chengjun did not miss the opportunity to introduce.

Su Cheng and Xiao Yu came forward at the same time to observe the welding situation. After a while, Xiao Yu raised his thumb back and said, "The weld is beautiful. The workpiece is uniform and stable, and there is no problem.

The workers of COSCO shipping applauded desperately. Master Du slowly took off his mask, rubbed the workpiece with his hand, and his lips buzzed.

Su Cheng sighed secretly, took off the tie around his neck and stuffed it into his pocket. His hand scratched the white shirt, and it was also stained with oil. Su Cheng wiped it with his hand and simply painted it into oilcloth.

He Yuwei covered her mouth and smiled, took a work uniform from behind, handed it to him and said with a smile, "Put it on, you look like the person who works the most."

Su Cheng shook his head, took off his suit jacket and put on a yellow overalls. In this way, he turned into a suit trousers and a suit.

The crowd moved forward slowly and continued to visit the new machine. Su Cheng pointed to them and said, "Go and watch first. I'll take a break in the back."

"Okay." He Yuwei left uneasy.

In this way, Su Cheng and Master Du were left at the scene.

Master Du's face was withered, and his cheeks were close to the bones. He stood in a daze for a moment, and finally let out a leisurely "snoring" and said with a tragic smile, "Su Dong, let you find it."

Su Cheng said "um" and handed him a cigarette.

No need for him to ask, Master Du said to himself, "I have two sons. The boss went to the technical school and went to work in the factory early, but he had not divided the house. He was about to get married, and there was no movement of building a house in the factory. In the past few years, for the sake of the boss, our old couple have been worried. As a result, we haven't finished it here, and the second brother has also graduated from high school. The factory has only solved a baby's job. He has to wait at home. As a result, this boy doesn't want to find a job all day, so he

Master Du laughed twice and said, "You know, these days, our workers can only point to the division of rooms in the factory. However, in the past two years, the factory has been full of newcomers and college students, and half of the house can't be left... I found the factory director, and finally said that it was for the boss to find a Wedding appliances, furniture..."

Su Cheng was silent. 1989 was indeed the most difficult year, especially for middle-aged workers with old and young people. In the face of hyperinflation that they can't understand, their income has suddenly shrunk, but the responsibility will only increase and will not be reduced...

"Who are you looking for?" Su Cheng asked gently.

"I don't know. Short, hanging eyebrows, like an out-of-town accent, threw me 10,000 yuan, and promised to find a job for the second brother..."

"Have you found it?"

"No. Yes, yes, after the end..." Master Du said, he cried silently and said, "I thought, it's okay to plan a little bit, just a little bit..."

Su Cheng patted him on the shoulder, shook his head, and said, "Dahua will start building a house immediately. At that time, all workers who are willing to work in Dahua will be distributed."

Master Du's eyes lit up, dimmed again, and said, "Dahua's treatment is really good."

"When you retire, you can come to work in Dahua." Su Chengqian stopped and said, "I don't know what happened today."

"This..." Master Du suddenly raised his head.

Su Cheng smiled and got up and left. Behind several machines, the hidden old workers also looked at each other and quietly left.