Chapter 171 This is the master!
To Roger's question, Gu Lie did not say anything, but asked, "How about it? Can you make it?"
Roger looked at him fixedly, pulled him up, and said eagerly, "Come on, come home with me!" Because of excitement, he spoke a little louder, which made nearby residents and pedestrians look sideways. He looked at both of them strangely. He seemed to be surprised that the old mechanic was old and had such a hobby.
Gu Lie was a little helpless, but he could only let Roger pull into the building. With his own operating ability, it is impossible to do the steel ball gun at all. The most important step still needs Roger to operate.
Back home, Roger got into the studio and asked Gu Lie to draw drawings for him.
Paper and pen are all relatively luxurious things here. The refill of the pencil can be made as long as the mineral is found, and paper consumes a lot of wood. Every tree here is protected. Do you want to move? No way!
However, the people here are very smart. They use a portable metal drawing board as a pen and paper. As for Roger's tool, it is more advanced. It is a half-wall-sized drawing board and a brush with color that can distinguish each part.
Gu Lie is quite familiar with these gun parts. He drew it directly without thinking about it. The gun body is represented by black, the bullet is represented by blue, the yellow is the spring, and the green is the wire that needs to be modified.
In order to draw more in detail, Gu Lie made it easier for Roger to understand. Originally, it only took five minutes to work, and it took more than ten minutes to draw. The parts of the gun body were meticulous and clear at a glance.
"It's amazing..." Roger suddenly sighed.
While Gu Lie closed his pen, he came to the front of the drawing board and gently passed over the picture. He did not really touch it, but to express his excitement.
"Gu Lie, where did you find this kind of thing?"
Gu Lie shook his head, pointed his finger to his head, and said, "I came up with it!"
Roger looked at him inadvertently and said in a judgmentful tone, "If it's really what you think of, I can only say that you are really talented in machinery. Maybe someone may not be able to reach the height in the future in hundreds of years!"
Gu Lie smiled and said, "It's not that powerful..." In fact, he knew that if he really transformed all kinds of firearms and made them through machining, even if there was no gunpowder, he could use other methods to improve the kinetic energy of bullet shooting.
It's just that this kind of thing can never be done. His appearance has affected the balance of the mainland to some extent. If the gun drawings are spread out again, it will bring endless killings.
Roger looked at the drawing board quietly and asked the first question for a long time. He pointed to the spring and said, "This is the most critical part. The hammer in the rear has almost no effect on your overall design!"
Gu Lie nodded and said, "That's right! Therefore, this is also the reason why I came to you. I think that it is impossible for me to make a part that can improve the kinetic energy emitted by the steel ball. The greater the kinetic energy, the farther the range, and the greater the power.
Roger is also thinking hard. Even with his eructual knowledge, he only knows little about firearms. The production of these parts is very simple, but once assembled, the requirements for materials are relatively high. Like wire, it is impossible to be flattened after only two or three times. It must be able to be used for a long time.
"Maybe we can use another method to transform your design drawings." Roger muttered a few words, took the brush and began to write hard on the other side of the drawing board. He was also drawing gun parts, but some parts were modified.
Looking at the gun body drawn by Roger, Gu Lie was almost depressed. The appearance alone has subverted the concept of a pistol. The oval buttocks are matched with two superimposed four barrels. If the volume is larger, it is completely a shotgun.
The steel ball gun designed by Gu Lie is easy to carry, and the length of the barrel is no more than 20 cm, while the body of the gun designed by Roger is at least more than 30 cm, almost as long as the M500.
Judging from the graphics he drew, the whole gun must be grasped with both hands, and it is impossible to use it with one hand.
In the half hour of drawing, Roger didn't start writing all the time. He frowned and thought deeply. I have to say that Roger's mechanical attainments have long surpassed Gu Lie's cognition. This kind of thing that he has never come into contact with can give transformation opinions just by the accumulation of knowledge. Gu Lie can't catch up with this ability.
"All right!" Roger suddenly shouted loudly, and then took a long breath. His face was filled with a smile that Gu Lie had never seen before, and he seemed to be quite satisfied with his design.
Gu Lie has no objection to his design. Anyway, the production requires him to do it himself. As long as he can use it successfully, he doesn't care what he makes.
"How's it going?" Roger asked with squint.
Gu Lie nodded and said, "It's very good. Four barrels are shot at the same time. It's quite complicated to make!" This is indeed the truth. It is not easy to load a single barrel bullet. The steps of replacing the four guns superimposed together will become very troublesome. The most difficult thing to solve is the problem of jams.
"Don't worry, since it has been designed, I will definitely be able to solve it!" Roger was full of confidence and said, "You come to be my deputy and help me with some tools and materials. Just let me arrange it."
The two came to the cutting machine. To be honest, Gu Lie was a little worried. The precision II cutting machine in front of him is really old. I don't know if it can meet the requirements.
Roger arranged for Gu Lie to wait, then turned to the other side to bring back a large amount of metal materials, and then began to use the cutting machine to make parts according to the drawings.
Gu Lie is responsible for delivering materials, replacing tools and other work. At the same time, he is also learning Roger's skill of operating the cutting machine. This skill can only be learned through two methods. One is to accumulate experience through his own operation, and the other is to watch the operation of a senior mechanic like Roger.
For a whole day, both of them were stuck in the studio. Gu Lie watched Roger using an old cutting machine and constantly making the parts in the drawings. At the same time, he was amazed and amazed.
Roger's operation of the cutting machine is like playing with a toy. No matter what shape he cuts the metal into, he can do it all at once, and he never needs a second time.
A pile of metal parts were placed on the table. Roger's eyes were red, but he was very excited. He picked up two parts and assembled them with two snaps, and then quickly assembled all the parts together.
So, in Gu Lie's eyes, a strange-shaped gun was made!